At least on Debian Wheezy with 3.x kernel sensors doesn't work properly.
How it looks:Edit
$ sensors k10temp-pci-00c3 Adapter: PCI adapter CPU Temp: +32.5°C (high = +70.0°C) (crit = +100.0°C, hyst = +95.0°C)
Ok, let's fix it for debian.Edit
- Compile and install https://github.com/fetzerch/hp-n54l-drivers
- If sensors output is still too small then check if sp5100_tco is loaded (lsmod | grep sp5100). Try to unload module (rmmod sp5100_tco) or blacklist it. Temperature (i2c-piix) or watchdog (sp5100_tco), your choice. More info
- Add this ppa and install hp-n54l-dkms package.
$ sensors k10temp-pci-00c3 Adapter: PCI adapter CPU Temp: +32.0°C (high = +70.0°C) (crit = +100.0°C, hyst = +95.0°C) jc42-i2c-0-18 Adapter: SMBus PIIX4 adapter port 0 at 0b00 RAM1 Temp: +30.2°C (low = +0.0°C) (high = +60.0°C, hyst = +54.0°C) (crit = +70.0°C, hyst = +64.0°C) w83795adg-i2c-1-2f Adapter: SMBus PIIX4 adapter port 2 at 0b00 Vcore: +0.69 V (min = +0.50 V, max = +1.40 V) Vdimm: +1.51 V (min = +1.42 V, max = +1.57 V) +3.3V: +3.31 V (min = +2.96 V, max = +3.63 V) 3VSB: +3.23 V (min = +2.96 V, max = +3.63 V) System Fan: 747 RPM (min = 329 RPM) CPU Temp: +31.2°C (high = +109.0°C, hyst = +109.0°C) (crit = +109.0°C, hyst = +109.0°C) sensor = thermal diode NB Temp: +42.2°C (high = +105.0°C, hyst = +105.0°C) (crit = +105.0°C, hyst = +105.0°C) sensor = thermal diode MB Temp: +24.0°C (high = +39.0°C, hyst = +39.0°C) (crit = +44.0°C, hyst = +44.0°C) sensor = thermistor
Community content is available under CC-BY-SA unless otherwise noted.